• img

OEM/ODM China Aluminum Laminated Film For Pouch Cell Case - EHAr – BOPA Film with High Barrier Performance – Changsu


Product Details

Related Video

Feedback (2)

Our company has been focusing on brand strategy. Customers' satisfaction is our best advertising. We also supply OEM service for plastic laminated film , battery pack thermal film , laminating film pouches 5mil , Warmly welcome to cooperate and develop with us! we will continue to provide product with high quality and competitive price.
OEM/ODM China Aluminum Laminated Film For Pouch Cell Case - EHAr – BOPA Film with High Barrier Performance – Changsu Detail:

EHA has good tensile strength and rubbing resistance contrast to PVDC film, such as KNY, alumina/ silicon oxide with vaccumn metalized. It can maintain the same superior oxygen barrier effect after repeated rubbing. EHA has high transparency and its film color would not have obvious change with time. The color of EHA will not change significantly with time. During incineration, it will not produce dioxins or toxic gases containing chlorine.

Features Benefits
✦High gas/aroma barrier ✦Extend shelf life, better freshness
✦High mechanical strength and puncture/impact resistance ✦Capable of packing heavier/larger products, rigid or sharp bone-in products
✦Good dimensional stability 
✦No barrier loss upon film deformation 
✦Thin but multi-functional
✦Accurate reverse printing 
✦Stable barrier 
✦Cost effective
Type Thickness/μm Width/mm Treatment OTR/cc·m-2·day-1

(23℃, 50%RH)

Retortability Printability
EHAr 15 300-2100 single/both side corona  < 8  100℃ pasteurization ≤ 12 colors

Notice: Retortability and printability are depending on customers’ lamination and printing processing condition.

Performance BOPP KNY EHA
OTR(cc/㎡.day.atm) 1900 8-10 < 2
Surface Color Transparency With light yellow Transparency
Puncture Resistance
Lamination Strength
Printability
Environment-friendly ×
Soft Touching

Bad ×        it’s OK △          quite good         ○ excellent ◎

EHAr is a transparent, high-barrier functional film. It’s heat-resistant to 100℃ boiling, OTR lower than 8 CC/m2.d.atm. Comparing with the conventional BOPA films, the oxygen resistance performance of EHAr is ten times better, which makes it very suitable for the packaging that has strict requirement in gas barrier, such as meat products, pickles and compound condiments.

Applications (1)
Applications (2)
Applications (3)

Deviation of Upper and Lower Printing Position

Causes:

●  The selection of nylon film is wrong and the product type does not match the printing requirements.

●  One side can be aligned, and the color group behind the other side gradually shifts inward

●  High temperature and humidity in printing environment lead to rapid moisture absorption and expansion of nylon.

●Too slow printing speed leads to moisture absorption of BOPA

Suggestions:

✔   It is recommended to use the temperature (23°C ±5°C) and humidity (≤75%RH). If the relative humidity exceeds 80%, stop using.

✔   Properly increase the tension, improve the printing speed of more than 60m/min for manual overprinting;

✔   Ensure printing speed up to 160m/min.


Product detail pictures:

OEM/ODM China Aluminum Laminated Film For Pouch Cell Case -
 EHAr – BOPA Film with High Barrier Performance  – Changsu detail pictures


Related Product Guide:

"Control the standard by the details, show the power by quality". Our organization has strived to establish a highly efficient and stable employees team and explored an effective high-quality command method for OEM/ODM China Aluminum Laminated Film For Pouch Cell Case - EHAr – BOPA Film with High Barrier Performance – Changsu , The product will supply to all over the world, such as: The Swiss , Kuala Lumpur , America , We set a strict quality control system. We have return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our products. Please feel free to contact us for further information if you have any questions. We are glad to work for every client.
  • Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
    5 Stars By Carol from Romania - 2017.12.09 14:01
    Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
    5 Stars By Dolores from United Arab Emirates - 2017.11.20 15:58
    Write your message here and send it to us