• img

Manufacturer for Plastic Laminating Film - EHAr – BOPA Film with High Barrier Performance – Changsu


Product Details

Related Video

Feedback (2)

Well-run equipment, expert income workforce, and far better after-sales expert services; We are also a unified large family, anyone stick to the corporate value "unification, dedication, tolerance" for plastic film hign barrier , stretch film rolls , matte thermal laminating film , Our group members are goal to provides merchandise with significant performance cost ratio to our consumers, as well as target for all of us is usually to satisfy our consumers from all around the environment.
Manufacturer for Plastic Laminating Film - EHAr – BOPA Film with High Barrier Performance – Changsu Detail:

EHA has good tensile strength and rubbing resistance contrast to PVDC film, such as KNY, alumina/ silicon oxide with vaccumn metalized. It can maintain the same superior oxygen barrier effect after repeated rubbing. EHA has high transparency and its film color would not have obvious change with time. The color of EHA will not change significantly with time. During incineration, it will not produce dioxins or toxic gases containing chlorine.

Features Benefits
✦High gas/aroma barrier ✦Extend shelf life, better freshness
✦High mechanical strength and puncture/impact resistance ✦Capable of packing heavier/larger products, rigid or sharp bone-in products
✦Good dimensional stability 
✦No barrier loss upon film deformation 
✦Thin but multi-functional
✦Accurate reverse printing 
✦Stable barrier 
✦Cost effective
Type Thickness/μm Width/mm Treatment OTR/cc·m-2·day-1

(23℃, 50%RH)

Retortability Printability
EHAr 15 300-2100 single/both side corona  < 8  100℃ pasteurization ≤ 12 colors

Notice: Retortability and printability are depending on customers’ lamination and printing processing condition.

Performance BOPP KNY EHA
OTR(cc/㎡.day.atm) 1900 8-10 < 2
Surface Color Transparency With light yellow Transparency
Puncture Resistance
Lamination Strength
Printability
Environment-friendly ×
Soft Touching

Bad ×        it’s OK △          quite good         ○ excellent ◎

EHAr is a transparent, high-barrier functional film. It’s heat-resistant to 100℃ boiling, OTR lower than 8 CC/m2.d.atm. Comparing with the conventional BOPA films, the oxygen resistance performance of EHAr is ten times better, which makes it very suitable for the packaging that has strict requirement in gas barrier, such as meat products, pickles and compound condiments.

Applications (1)
Applications (2)
Applications (3)

Deviation of Upper and Lower Printing Position

Causes:

●  The selection of nylon film is wrong and the product type does not match the printing requirements.

●  One side can be aligned, and the color group behind the other side gradually shifts inward

●  High temperature and humidity in printing environment lead to rapid moisture absorption and expansion of nylon.

●Too slow printing speed leads to moisture absorption of BOPA

Suggestions:

✔   It is recommended to use the temperature (23°C ±5°C) and humidity (≤75%RH). If the relative humidity exceeds 80%, stop using.

✔   Properly increase the tension, improve the printing speed of more than 60m/min for manual overprinting;

✔   Ensure printing speed up to 160m/min.


Product detail pictures:

Manufacturer for Plastic Laminating Film -
 EHAr – BOPA Film with High Barrier Performance  – Changsu detail pictures


Related Product Guide:

Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for Manufacturer for Plastic Laminating Film - EHAr – BOPA Film with High Barrier Performance – Changsu , The product will supply to all over the world, such as: Pakistan , Angola , Slovakia , We are trying our best to make more customers happy and satisfied. we sincerely hope to establish a good long-term business relationship with your esteemed company thought this opportunity,based on equal, mutual beneficial and win win business from now till the future.
  • This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Jamie from Dubai - 2017.05.21 12:31
    This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By Betsy from Ethiopia - 2017.03.28 16:34
    Write your message here and send it to us