China Good Quality Bopp Lamination Film - EHAr – BOPA Film with High Barrier Performance – Changsu manufacturers and suppliers

Good Quality Bopp Lamination Film - EHAr – BOPA Film with High Barrier Performance – Changsu

Product Details

Feedback (2)

"Control the standard by the details, show the power by quality". Our firm has strived to establish a extremely efficient and stable employees crew and explored an effective excellent command method for packaging plastic roll film , thermal film laminate , food grade vacuum sealer film , Hope we are able to produce a far more superb long term with you by our efforts from the foreseeable future.

Good Quality Bopp Lamination Film - EHAr – BOPA Film with High Barrier Performance – Changsu Detail:

EHA has good tensile strength and rubbing resistance contrast to PVDC film, such as KNY, alumina/ silicon oxide with vaccumn metalized. It can maintain the same superior oxygen barrier effect after repeated rubbing. EHA has high transparency and its film color would not have obvious change with time. The color of EHA will not change significantly with time. During incineration, it will not produce dioxins or toxic gases containing chlorine.

Features	Benefits
✦High gas/aroma barrier	✦Extend shelf life, better freshness
✦High mechanical strength and puncture/impact resistance	✦Capable of packing heavier/larger products, rigid or sharp bone-in products
✦Good dimensional stability ✦No barrier loss upon film deformation ✦Thin but multi-functional	✦Accurate reverse printing ✦Stable barrier ✦Cost effective

Type

Thickness/μm

Width/mm

Treatment

OTR/cc·m^-2·day^-1

(23℃, 50%RH)

Retortability

Printability

EHAr

300-2100

single/both side corona

< 8

100℃ pasteurization

≤ 12 colors

Notice: Retortability and printability are depending on customers’ lamination and printing processing condition.

Performance	BOPP	KNY	EHA
OTR(cc/㎡.day.atm)	1900	8-10	＜ 2
Surface Color	Transparency	With light yellow	Transparency
Puncture Resistance	○	◎	◎
Lamination Strength	◎	△	◎
Printability	◎	△	◎
Environment-friendly	◎	×	◎
Soft Touching	△	◎	◎

Bad × it’s OK △ quite good ○ excellent ◎

EHAr is a transparent, high-barrier functional film. It’s heat-resistant to 100℃ boiling, OTR lower than 8 CC/m2.d.atm. Comparing with the conventional BOPA films, the oxygen resistance performance of EHAr is ten times better, which makes it very suitable for the packaging that has strict requirement in gas barrier, such as meat products, pickles and compound condiments.

Applications (1)
Applications (2)
Applications (3)

Deviation of Upper and Lower Printing Position

Causes:

● The selection of nylon film is wrong and the product type does not match the printing requirements.

● One side can be aligned, and the color group behind the other side gradually shifts inward

● High temperature and humidity in printing environment lead to rapid moisture absorption and expansion of nylon.

●Too slow printing speed leads to moisture absorption of BOPA

Suggestions:

✔ It is recommended to use the temperature (23°C ±5°C) and humidity (≤75%RH). If the relative humidity exceeds 80%, stop using.

✔ Properly increase the tension, improve the printing speed of more than 60m/min for manual overprinting;

✔ Ensure printing speed up to 160m/min.

Product detail pictures:

Related Product Guide:

We have been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Good Quality Bopp Lamination Film - EHAr – BOPA Film with High Barrier Performance – Changsu , The product will supply to all over the world, such as: Oman , Johannesburg , United Arab emirates , If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

laminated bopa film