Factory source Lamination Bopa Film - Sequential BOPA With Balanced Physical Properties – Changsu
Factory source Lamination Bopa Film - Sequential BOPA With Balanced Physical Properties – Changsu Detail:
HOA1 can be used for color printing within 9 colors (including 9 colors), bag making with sealing width ≤ 6cm, and high-grade packaging with frame requirements. It is not easy to warp and curl after boiling and ordinary high-temperature cooking below 121 ℃. Such as: snack packaging, sauce bag, dried tofu packaging, chicken packaging, beef packaging, poultry packaging, chestnut packaging, rice packaging, pet food packaging, high temperature cooking packaging，etc..
| Features | Benefits |
| ✦ Exceptional mechanical strength and puncture/impact resistance | ✦ Capable of heavy packaging, sharp or rigid products with excellent packaging safety |
| ✦Good dimensional stability | ✦ Excellent performance in printing and various coating processes |
| ✦ Isotropic physical properties | ✦ Minimum distortion after retort |
| Thickness /μm | Width/mm | Treatment | Retortability | Printability |
| 15 | 300-2100 | single/both side corona | ≤121℃ | ≤9 colors |
Notice: retortability and printability are depending on customers’ lamination and printing processing condition.
| Performance | BOPP | BOPET | BOPA |
| Puncture Resistance | ○ | △ | ◎ |
| Flex-crack Resistance | △ | × | ◎ |
| Impact Resistance | ○ | △ | ◎ |
| Gases Barrier | × | △ | ○ |
| Humidity Barrier | ◎ | △ | × |
| High Temperature Resistance | △ | ◎ | ○ |
| Low Temperature Resistance | △ | × | ◎ |
bad× normal△ quite good○ excellent◎
HOA1 can be used for color printing within 9 colors (including 9 colors), bag making with sealing width ≤ 6cm, and high-grade packaging with frame requirements. It is not easy to warp and curl after boiling and ordinary high-temperature cooking below 121 ℃. Such as: snack packaging, sauce bag, etc.
Use Precautions
✔ Protective film does not absorb moisture
✔ Samples should be wrapped in aluminum-plastic composite bags.
✔ Please do not open the package early before use.
✔ Open it when it is about to be used.
✔ If it can’t be used up, the remaining film should be wrapped with good barrier aluminum plastic film immediately.
✔ During printing, the first color group is not printed on the plate roll, and pre- drying is required.
✔ Please put it into the curing room to dry for 2-3 hours before use.
✔ It is suggested that the temperature and humidity in the production workshop should be controlled at 23 ±5 ℃, and the humidity should be less than 85% RH.
✔ Avoiding collision during handling and transportation
Product detail pictures:
Related Product Guide:
With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for our clients for Factory source Lamination Bopa Film - Sequential BOPA With Balanced Physical Properties – Changsu , The product will supply to all over the world, such as: Accra , New York , Philadelphia , Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Sandy
from Mozambique
- 2018.02.08 16:45
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Elaine
from French
- 2017.12.09 14:01
