• img

Factory Cheap Hot Laminating Film Pouches 5mil - EHAr – BOPA Film with High Barrier Performance – Changsu


Product Details

Related Video

Feedback (2)

As a way to present you with ease and enlarge our enterprise, we also have inspectors in QC Workforce and assure you our greatest support and solution for Sauce nylon pack , Retort pouch , food grade bopa film , Looking to the future, a long way to go, constantly striving to become the all staff with full enthusiasm, one hundred times the confidence and put our company built a beautiful environment, advanced products, quality first-class modern enterprise and work hard!
Factory Cheap Hot Laminating Film Pouches 5mil - EHAr – BOPA Film with High Barrier Performance – Changsu Detail:

EHA has good tensile strength and rubbing resistance contrast to PVDC film, such as KNY, alumina/ silicon oxide with vaccumn metalized. It can maintain the same superior oxygen barrier effect after repeated rubbing. EHA has high transparency and its film color would not have obvious change with time. The color of EHA will not change significantly with time. During incineration, it will not produce dioxins or toxic gases containing chlorine.

Features Benefits
✦High gas/aroma barrier ✦Extend shelf life, better freshness
✦High mechanical strength and puncture/impact resistance ✦Capable of packing heavier/larger products, rigid or sharp bone-in products
✦Good dimensional stability 
✦No barrier loss upon film deformation 
✦Thin but multi-functional
✦Accurate reverse printing 
✦Stable barrier 
✦Cost effective
Type Thickness/μm Width/mm Treatment OTR/cc·m-2·day-1

(23℃, 50%RH)

Retortability Printability
EHAr 15 300-2100 single/both side corona  < 8  100℃ pasteurization ≤ 12 colors

Notice: Retortability and printability are depending on customers’ lamination and printing processing condition.

Performance BOPP KNY EHA
OTR(cc/㎡.day.atm) 1900 8-10 < 2
Surface Color Transparency With light yellow Transparency
Puncture Resistance
Lamination Strength
Printability
Environment-friendly ×
Soft Touching

Bad ×        it’s OK △          quite good         ○ excellent ◎

EHAr is a transparent, high-barrier functional film. It’s heat-resistant to 100℃ boiling, OTR lower than 8 CC/m2.d.atm. Comparing with the conventional BOPA films, the oxygen resistance performance of EHAr is ten times better, which makes it very suitable for the packaging that has strict requirement in gas barrier, such as meat products, pickles and compound condiments.

Applications (1)
Applications (2)
Applications (3)

Deviation of Upper and Lower Printing Position

Causes:

●  The selection of nylon film is wrong and the product type does not match the printing requirements.

●  One side can be aligned, and the color group behind the other side gradually shifts inward

●  High temperature and humidity in printing environment lead to rapid moisture absorption and expansion of nylon.

●Too slow printing speed leads to moisture absorption of BOPA

Suggestions:

✔   It is recommended to use the temperature (23°C ±5°C) and humidity (≤75%RH). If the relative humidity exceeds 80%, stop using.

✔   Properly increase the tension, improve the printing speed of more than 60m/min for manual overprinting;

✔   Ensure printing speed up to 160m/min.


Product detail pictures:

Factory Cheap Hot Laminating Film Pouches 5mil -
 EHAr – BOPA Film with High Barrier Performance  – Changsu detail pictures


Related Product Guide:

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Factory Cheap Hot Laminating Film Pouches 5mil - EHAr – BOPA Film with High Barrier Performance – Changsu , The product will supply to all over the world, such as: Swedish , Swansea , California , Our products are widely recognized and trusted by users and can meet continuously changing of economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
  • The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Olive from Palestine - 2017.01.28 18:53
    Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
    5 Stars By Bruno Cabrera from Zambia - 2018.06.28 19:27
    Write your message here and send it to us