• img

Chinese Professional Cold Laminating Film - EHAr – BOPA Film with High Barrier Performance – Changshu


Product Details

Related Video

Feedback (2)

With our excellent administration, potent technical capability and strict top quality control technique, we go on to provide our consumers with trusted quality, reasonable price ranges and fantastic providers. We intention at becoming one among your most trusted partners and earning your fulfillment for 12u nylon film , NYLON Film for printing , Cooking oil nylon bag , We warmly welcome merchants from home and abroad to call us and establish business relationship with us, and we will do our best to serve you.
Chinese Professional Cold Laminating Film - EHAr – BOPA Film with High Barrier Performance – Changshu Detail:

EHA has good tensile strength and rubbing resistance contrast to PVDC film, such as KNY, alumina/ silicon oxide with vaccumn metalized. It can maintain the same superior oxygen barrier effect after repeated rubbing. EHA has high transparency and its film color would not have obvious change with time. The color of EHA will not change significantly with time. During incineration, it will not produce dioxins or toxic gases containing chlorine.

Features Benefits
✦High gas/aroma barrier ✦Extend shelf life, better freshness
✦High mechanical strength and puncture/impact resistance ✦Capable of packing heavier/larger products, rigid or sharp bone-in products
✦Good dimensional stability
✦No barrier loss upon film deformation
✦Thin but multi-functional
✦Accurate reverse printing
✦Stable barrier
✦Cost effective
Type Thickness/μm Width/mm Treatment OTR/cc·m-2·day-1(23℃, 50%RH) Retortability Printability
EHAr 15 300-2100 single/both side corona  < 8  100℃ pasteurization ≤ 12 colors

Notice: Retortability and printability are depending on customers’ lamination and printing processing condition.

Performance BOPP KNY EHA
OTR(cc/㎡.day.atm) 1900 8-10 < 2
Surface Color Transparency With light yellow Transparency
Puncture Resistance
Lamination Strength
Printability
Environment-friendly ×
Soft Touching

Bad ×        it’s OK △          quite good         ○ excellent ◎

EHAr is a transparent, high-barrier functional film. It’s heat-resistant to 100℃ boiling, OTR lower than 8 CC/m2.d.atm. Comparing with the conventional BOPA films, the oxygen resistance performance of EHAr is ten times better, which makes it very suitable for the packaging that has strict requirement in gas barrier, such as meat products, pickles and compound condiments.

Applications (1)
Applications (2)
Applications (3)

Deviation of Upper and Lower Printing Position

Causes:

●  The selection of nylon film is wrong and the product type does not match the printing requirements.

●  One side can be aligned, and the color group behind the other side gradually shifts inward

●  High temperature and humidity in printing environment lead to rapid moisture absorption and expansion of nylon.

●Too slow printing speed leads to moisture absorption of BOPA

Suggestions:

✔   It is recommended to use the temperature (23°C ±5°C) and humidity (≤75%RH). If the relative humidity exceeds 80%, stop using.

✔   Properly increase the tension, improve the printing speed of more than 60m/min for manual overprinting;

✔   Ensure printing speed up to 160m/min.


Product detail pictures:

Chinese Professional Cold Laminating Film -
 EHAr – BOPA Film with High Barrier Performance  – Changshu detail pictures


Related Product Guide:

Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for Chinese Professional Cold Laminating Film - EHAr – BOPA Film with High Barrier Performance – Changshu , The product will supply to all over the world, such as: Paraguay , Sao Paulo , Manchester , It is our customers' satisfaction over our products and services that always inspires us to do better in this business. We build mutually beneficial relationship with our clients by giving them large selection of premium car parts at marked down prices. We offer wholesale prices on all our quality parts so you are guaranteed greater savings.
  • In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
    5 Stars By Juliet from Czech republic - 2018.09.23 17:37
    The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Alma from Norwegian - 2018.10.31 10:02
    Write your message here and send it to us