• img

MATT – BOPA Film for Matte Effect Required Package

MATT is a 12/15 μm BOPA product with a build-in matte appearance on one side. The matte effect has no influence on the thermal or mechanical properties of the BOPA. It helps the customers to eliminate the use of additional processes, specialty films or chemicals which may not be fully applicable to food or hygiene products.

syerd (1) syerd (2) syerd (3) syerd (4)


Product Details

✔  With the features of high haze and low gloss effect, the product packaging can have soft reflection effect.

✔  Make the printed pattern more realistic and have a soft hand touching, and significantly improve the packaging level.

✔ Master batch-based matte film would not arise some problems coursed by friction, heat sealing and other processes, such as matte layer peeling or damage.

✔ MATT can apply to more high-efficient automatic packaging and high temperature retort.

Features Benefits
✦ Build-in matte appearance ✦ Eliminate the need for additional processes – safer, more efficient, better scuff resistance…
✦ Excellent mechanical properties, printability and gas barrier;
✦Boiling does not affect the matte appearance
✦ Single web of multiple functions – simpify the laminate structure; 
✦ Capable of retort applications

Product Parameters

Thickness/μm Haze Gloss Width/mm Treatment Retortability Printability
12 - 25 30-48 40-28 300-2100 Inner side corona ≤ 121℃ ≤9 colors

Notice: Retortability and printability are depending on customers’ lamination and printing processing condition.

Performance Comparison of General External Materials

Performance BOPP BOPET BOPA
Puncture Resistance
Flex-crack Resistance ×
Impact Resistance
Gases Barrier ×
Humidity Barrier ×
High Temperature Resistance
Low Temperature Resistance ×

bad×      normal△      quite good○      excellent◎

Applications

MATT is a kind of nylon film with matte characteristic, which can be applied in luxury and vagueness packaging, such as high-end snacks, daily detergents, book cover and so on.

Applications (1)
Applications (2)

FAQ

How to Deal with Ink Loss in Film Printing?

The probability of ink dropping is relatively low in the printing of paper self-adhesive materials, which is mainly due to the unstable surface tension of film materials. In general, the poor UV curing excessive ink additives are also the main reasons of ink dropping.

The measurement of dyne value is most commonly used in printing, which can reflect the good printing of the material and what kind of ink is applicable. Because the dyne value of the material is a certain number, the selected ink should be close to it and slightly smaller in order to achieve the best printing effect.


  • Previous:
  • Next:

  • Write your message here and send it to us